Menu
| RIM 108 corrosion inhibitor is a water-soluble, film-forming product designed to give excellent corrosion protection in topside oil and gas production systems and in pipelines. RIM 108 has been designed to give a lew level of environmental impact when compared to more commonly applied corrosion inhibitors. It has been widely used in several offshore fields in the North Sea, Middle East and Asia Pacific. | |
| Typical Physical Properties | Appearance - Clear, dark brown liquid Density 1.03 - 1,07 g/cm3@ 20XIM Pour point - <-10°C Flash point - .100° PH, concentrated product - 3.5 -4.5 Solubility - Water |
| Applications | RIM 108 corrosion inhibitor is effective against C02 corrosion, as well as H2S corrosion. The product is water-soluble and will partition readily to the water phase. The environmental concerns that are associated with the use of some water-soluble corrosion inhibitors are not a concern for this product. RIM 108 inhibitor has an extremely low marine toxicity, does not have a tendency to bioaccumulation and is readily biodegradable. This product has shown good effectiveness in comparative tests performed both in our own laboratories and in third party evaluations. Continuous treatment with 1 to 5ppm of RIM 108 inhibitor is recommended based upon the total liquid volume, if the water cut is below 5%. The recommended dosage is 20 to 50 ppm, based on water volume, if the water cutis above 5%. Optimization of treatment should be performed according to corrosion monitoring results. |
| RIM 109 inhibitor is designed to give protection for scale and corrosion problems in oilfield systems. It will protect against the formation of both sulphate and carbonate scales in subsea flow lines (or topside facilities). RIM 109 inhibitor also protects against both sweet and sour corrosion for similar areas. The performance of the product is independent of the production of sand. | |
| Typical Physical Properties | Appearance - Dark-brown liquid Density - 1.21 -1.235 g/cm3 @ 20°C Pour point - <-9°C Flash point - > 100X pH, concentrated product - 9.0-9.5 Solubility - Water-soluble |
| Applications | RIM 109 additive is a combined scale corrosion inhibitor designed-for sub Sea application where limitations on the number of injection lines make combination products The preferred option. It has shown particular effectiveness against the type of scale problems encountered in the North Sea. The product is also extremely effective at inhibiting the corrosion typically encountered at North Sea wellheads. When formulating RIM 109 inhibitor it was discovered that the particular combination of scale and corrosion inhibiting components gave a synergistic performance.RIM 109 inhibitor has been tested for compatibility with the typical materials used for sub-sea umbilical and approved for use. |